Description
Stainless steel with high-polished top plate and brushed under-trim plate reveal – Interior Steering Wheel Control Trim Surrounds.
Comes as a 2-piece set, one for each side of the steering wheel.
Easy installation – just peel and stick. Stays in place.It willl not rust, corrode, or lose its luster.
INSTALLATION INSTRUCTIONS (Please read before beginning)
Parts Included: 2 x Steering wheel control trim pieces, 1 x packet of promoter, and 1 x interior test kit.
IMPORTANT! Before you begin, you must first prepare the steering wheel areas where the pieces will be installed to ensure proper adhesion. Scrub the entire area with household isopropyl alcohol (available at any hardware store). You can also lightly roughen the surface for a more permanent bond.
NOTE: If these areas have been treated with Armor-All or any similar surface protector, installation will NOT work unless these treatments have first been removed using special cleaners.
PLEASE NOTE: Once parts are mounted, they cannot be returned due to installation errors.
- Take each trim piece and hold it in place where you intend to mount it. Press both ends (top and bottom) to form it to the steering wheel and adjust the bend as needed. Once satisfied with the fit, set them aside. After preparing the area, use the adhesive promoter packs/tubes (provided) to wipe the steering wheel areas where the stainless pieces will be installed. Allow a few seconds to dry. Use the test strip provided to check adhesion. If it sticks well, proceed. If it does not, repeat the preparation steps.
- Before removing the liner for permanent attachment, place each piece into position to check fit and familiarize yourself with how it sets in place. Some pieces may require gentle hand-forming to match the steering wheel shape for a perfect fit. Once satisfied, peel the red release liner and firmly press each piece into position.
If you have any questions during installation, please contact admin@TheProwlerStore.com.
Note: Extra care must be taken when cleaning your dash kit. Lightly dust it first with a clean, soft cloth to prevent scratches. Then wipe with a new, clean, soft cloth using a high-quality, streak-free glass cleaner.





























