Description
‘Brushed’ top plate on polished under plate
The finest, highest-quality Prowler Interior Upgrade Set available.
Brushed and high-polished stainless steel professional interior dress-up package. Fifteen (15) individual pieces that will transform your Prowler into the show car it deserves to be. Each part is made of two bonded stainless steel pieces: the top beauty plate and the bottom trim reveal.
This is absolutely the finest quality and most professional interior upgrade sold for the Prowler anywhere in the world. It turns your average interior into a true show car!
Brushed piece set: The top plate is brushed stainless steel, and the bottom plate, which forms the outer trim, is polished stainless steel.
15 Pieces – Polished top plate with brushed trim ring includes:
- 2 x (2-piece Door Arm Rest Panels)
- 2 x Door Handle Surrounds
- 1 x Power Mirror Trim Surround for Driver’s Door
- 1 x Radio Console Trim
- 1 x Glove Box Handle Surround Trim (2-piece)
- 2 x Steering Wheel Control Trim Surrounds
- 2 x A/C Vent Trim Rings
INSTALLATION INSTRUCTIONS
Parts Included – 14 Pieces: 2 x (2-piece Door Arm Rest Panels); 2 x Door Handle Surrounds; 2 x Power Window Surround Trims; 1 x Radio Console Trim; 1 x Glove Box Handle Surround Trim (2-piece); 2 x Steering Wheel Control Trim Surrounds; 2 x A/C Vent Trim Rings; plus Test Kit of stickees and rough pads.
IMPORTANT! Before you begin, you must first prepare your dash/door areas where the pieces will be installed to ensure adhesion. Scrub the entire area with household isopropyl alcohol.
NOTE: If these areas have been treated with Armor-All or any similar surface protector, installation will NOT work unless these treatments are removed using special cleaners. We cannot be responsible for kits not sticking due to improperly prepared surfaces.
PLEASE NOTE: Once parts are mounted, they cannot be returned due to installation errors.
- Once the areas are prepared, use the adhesive promoter packs/tubes (provided) to wipe the dash/door areas where the new stainless pieces will be installed. Allow a few seconds to dry. Use the test strip provided to check adhesion. If it sticks well, you may proceed. If it does not, repeat the preparation procedure as instructed.
- Before removing the liner for permanent attachment, place each piece into position to check fit and get familiar with how it sets in place. Some pieces may need gentle hand-forming to match the shape of your dash for a perfect fit. Once satisfied, peel the red release liner and firmly press each piece into position.
If you have any questions during installation, please contact office@TheProwlerStore.com.
Note: Extra care must be taken when cleaning your dash kit. Lightly dust it first with a clean, soft cloth to prevent scratches. Then wipe with a new, clean, soft cloth using a high-quality, streak-free glass cleaner.
