Description
Super High-Quality Part
Designed specifically for the Plymouth Prowler (1996–2002). This all-stainless steel license plate bracket includes an attached mounting bracket. It is designed to mount underneath your bumper (either side) in the indented slot. Once mounted, the bracket is invisible.
Easy mounting: You will need to drill two small holes in the underside of your bumper in the slot. These holes are not visible unless you crawl under the car and look up. The bracket mounts firmly with two included bolts and looks great. Will not rust, corrode, or come loose.
INSTALLATION INSTRUCTIONS
Parts included: 1 x License Plate Frame with attached bracket, 4 x Mounting screws with chrome caps.
For installation, you will need: A household drill with a 9/64″ drill bit, a screwdriver, and a pen
This front license plate bracket is designed to fit into the channel on the underside of either of the two front bumpers. Its retro styling is constructed of 20-gauge 304 stainless steel and will maintain its look and appearance for many years. It is simple to install with basic tools.
- Place the bracket in position on the underside channel of either bumper and mark the hole locations with a fine marker.
- Drill pilot holes at the four marked locations using a 9/64″ drill bit.
- Reposition the bracket and secure it with the four washer-head screws provided.




























