Description
Stainless Steel High-Polished Glove Box Handle Trim – Button overlay and handle trim surround.
Easy installation – just peel and stick. Stays in place. It will not rust, corrode, or lose its luster.
INSTALLATION INSTRUCTIONS
Included: Trim part(s), 1 x Promoter Packet, 1 x Tape Test Kit
IMPORTANT! Before you begin, you must first prepare your dash/door areas where the pieces will be mounted to ensure proper adhesion. Scrub the entire area thoroughly with household isopropyl alcohol (available at any grocery or hardware store).
NOTE: If these areas have been treated with Armor-All or any similar surface protector, installation will NOT work unless these treatments are removed using special cleaners. If adhesion is difficult after cleaning, use a rough pad to lightly scuff the surface. We cannot be responsible for kits not sticking due to improperly prepared surfaces.
PLEASE NOTE: Once parts are mounted, they cannot be returned due to installation errors.
- Once the areas are prepared, use the adhesive promoter pack (provided) to wipe the dash/door areas where the stainless pieces will be applied. Allow a few seconds to dry. Use the test strip provided to check adhesion – peel off the backing, apply it to the surface, and remove it. If it sticks well, you may proceed. If not, repeat the preparation process.
- Before removing the liner for permanent attachment, place each piece into position to check fit and familiarize yourself with its placement. Some pieces may require gentle hand-forming to match the shape of your dash for a perfect fit. Once satisfied, peel the red release liner and firmly press each piece into position, applying pressure across the entire surface of the trim piece.
If you have any questions during installation, please contact office@TheProwlerStore.com.
Note: Extra care must be taken when cleaning your dash kit. Lightly dust it first with a clean, soft cloth to prevent scratches. Then wipe with a new, clean, soft cloth using a high-quality, streak-free glass cleaner.




