Description
Set of 2 self-adhesive stainless steel Prowler Kat emblem side markers makes your side lights look first-class! The Prowler Kat logo is cut out to expose the Side Marker Light.
Will not rust, corrode, stain, or ever lose its luster.
Easy peel-and-stick mounting.
INSTALLATION INSTRUCTIONS
Included: 2 x Stainless Steel Oval Side Marker Covers, 1 x promoter packet
- Wash your Side Marker Lights on your fenders with rubbing alcohol. This will remove all the oil on the surface. Be sure to clean every nook and cranny around the area so that your Trim Plate can get a good adhesive grip.
- Take the Trim Oval Covers and position them on your Side Marker Light. Center the cover over the marker light. You will see a little bit of the marker light around the exterior of the cover. Position it as you want for permanent mounting.
NOTE: You may want to slightly bend the stainless oval covers to match the slight curve of your marker lights. - Once you are comfortable with the fit, remove the red backing on the back side to expose the sticky tape. Take your promoter packet and wipe the entire area where your Trim Plates will attach.
- Carefully re-position the Trim Oval Covers in place without touching the Side Marker Light. Once you are certain of the placement, lightly set it against the marker light. Make any final tiny adjustments. Then press the Trim Oval Cover firmly, pressing all around the surface to ensure it sticks everywhere it touches the dash.
- Repeat the same procedure on the other side. Clean the area with rubbing alcohol.





