Description
Beautiful professional paint job to match factory paint
This fiberglass panel fastens to your door with automotive-grade tape. You may order the set in primer or any Prowler car stock color.
You’re on your way to a matching interior. It comes ready to attach to the door interior via professional 3M automotive tape already applied. Easy to install and easy to remove with no damage to the interior.
Check out our leather steering wheel wraps to match.
INSTALLATION INSTRUCTIONS
Parts Included: 2 x Fiberglass door panels, 2 x Promoter packets, 1 x Tape Tester Strip
- Clean the entire surface of the door panel where you will mount the fiberglass panel thoroughly with isopropyl alcohol (available at any hardware store). Scrub vigorously, especially if you have ever used any protectant such as Armor-All on your interior. The automotive tape will not stick unless all oils are removed.
- Use the tape tester strip included (or masking tape). Remove the backing and stick half of the tape on various places around the interior door surface to test adhesion. If it does not stick, repeat Step 1. If you have a good surface for sticking, proceed to Step 3.
- Without removing the tape backing on your new door panels, hold them in position to ensure proper fit. Once you stick the panel on, do not remove it, or you will compromise the tape adhesive.
- When you are confident with the fit, remove the tape backing. Hold the panel about half an inch from the door, check alignment, then gently press it in place. Re-check alignment, make any small adjustments, and then press firmly across the entire surface to secure. Allow 24 hours to set.



















