Description
Stainless Steel High Polished Top Plate and Brushed Bottom Trim Plate A/C Vent Trim Surrounds.
Easy installation – just peel and stick. Stays in place.
It will not rust, corrode, or lose its luster.
INSTALLATION INSTRUCTIONS
Included: Trim Part(s), 1 x Promoter Packet, 1 x Tape Test Kit
IMPORTANT! Before you begin, prepare your dash/door areas where the pieces will be mounted to ensure proper adhesion. Clean the entire area with household isopropyl alcohol (available at any grocery or hardware store).
NOTE: If these areas have been treated with Armor-All or any similar surface protectant, installation will NOT work unless these treatments are removed using special chemicals. Use a rough pad to lightly scuff the surface if adhesion issues occur after cleaning.
We cannot be responsible for kits not sticking due to improperly prepared surfaces.
PLEASE NOTE: Once parts are mounted, they cannot be returned due to installation errors.
- After preparation, use the provided adhesive promoter packs/tubes to wipe the dash/door areas to be covered with your new stainless pieces. Allow a few seconds to dry. Use the provided test strip to check adhesion by peeling off the back and applying it to the interior surface, then removing it.
If it sticks well, proceed with installation. If not, repeat the special preparation procedures. - Before removing the liner for permanent attachment, place each piece into position to check the fit and understand how it aligns. Some parts may need gentle hand-forming to match the dash shape for a perfect fit. Once satisfied, peel the red liner and firmly press each piece into place, ensuring firm pressure along the entire trim surface.
If you have any questions during installation, please contact office@TheProwlerStore.com.
Note: EXTRA CARE must be taken when cleaning your dash kit. First, lightly dust with a clean, soft cloth to prevent scratching. Then, wipe with a new, clean soft cloth and a high-quality, streak-free glass cleaner.























