INSTRUCTIONS

We cannot guarantee that you can program this yourself. However, your local dealer will be able to program it for you. If you have any problems, you may contact us for help at admin@TheProwlerStore.com or call 352-666-8379, Monday to Friday, 9:00 AM to 2:00 PM EST.

VERY IMPORTANT:

1. Read all instructions before beginning. Practice the procedures first before starting.
2. One programmed remote transmitter must be available for the following procedure to work.
3. Reprogram all remote transmitters.
4. Any existing remote transmitters not used during programming will become inoperative.

Programming Instructions:

1. Switch the ignition on.
2. Use the programmed remote transmitter and press and hold the unlock button for up to 10 seconds.
3. After holding the unlock button for 5 seconds, press the PANIC button on the remote and release both buttons simultaneously.
4. Ensure an acoustic signal is emitted, indicating programming mode is active.
5. Within 30 seconds, carry out the following procedure for each remote transmitter:
   1. Press and release the lock and unlock buttons on the remote simultaneously.
   2. Then press any button on the remote transmitter.
6. Ensure an acoustic signal is emitted after each remote transmitter operation.
7. Switch the ignition off or wait 30 seconds to exit programming mode.
8. Ensure a final acoustic signal is emitted.
   Note: A maximum of 4 remote transmitters can be programmed.