Description
Chrome hard automotive plastic emblem Horse Power rating for Prowler years 1997-2002. Heat-resistant, will work on top of the engine as well.
3.5L = Stock Prowler (1 1/4″ x 3 3/4″)
V6 = Stock Prowler (1 1/4″ x 2 1/2″)
253HP = Stock Prowler (1 1/4″ x 6 1/2″)
300HP = 97-02 Prowler with performance mods (1 1/4″ x 6 1/2″)
This item contains one (1) emblem as shown.
Mounting Individual Letter and Number Emblems
Mounting Instructions
- First, wash the area on the car where you will mount the emblems with soap and water. Next, wipe down the area with rubbing alcohol. This will remove any oils from the paint surface without harming it.
- Now take your new emblem and, without peeling off the backing, hold it up to the spot where it will be mounted. Familiarize yourself with its placement.
- Place masking tape in an “L” shape to guide you where to mount your letters. (See diagram 1 below.)
- Once satisfied, take the included promoter packet and wipe the area using the damp towelette where the new emblem will mount. This will not harm your paint.
- Peel the liner off the back of the new emblems one at a time and carefully hold each up to the spot where it will be mounted. Gently set the emblem in place without pressing. Once positioned, press firmly on the entire surface to form a tight bond. Repeat for each letter or number.
- Carefully wipe the emblem and the surrounding area with rubbing alcohol to clean any residue. Remove the masking tape. You’re done!




