Mounting Instructions

Included: 2 clear raised logo stickers, promoter packet

1. Wash the tail light surface with soap and water.
2. Wash the surface again with rubbing alcohol to remove any oils, including fingertip oils.
3. Hold the sticker in place to find the best position (usually the center of the taillight lens). Once decided, mark the position with a grease pencil or chalk. Measure and mark the placement on the other taillight as well.
4. Open the promoter packet and wipe down both taillight lenses where the stickers will be mounted.
5. Allow the promoter to dry for 2 minutes.
6. Peel the backing off the sticker, leaving the top clear cover attached.
7. Carefully place the sticker over the marked area. Set it down gently and make any final small adjustments before pressing. Ensure it is straight.
8. Press firmly across the entire surface through the clear top cover to secure a strong bond. Then carefully remove the top clear cover.
9. Repeat the process for the other taillight.