INSTALLATION INSTRUCTIONS

Included: 2 x Vinyl Oval Side Marker Covers, 1 x promoter packet

1. Wash your side marker lights on the fenders with rubbing alcohol. This removes oil from the surface. Be sure to clean every nook and cranny around the area so the trim plate can get a strong adhesive grip.
2. Take a Vinyl Oval Side Marker Cover and place it against the side marker light on your fender. Center the cover on the marker light — you should see a small outline of the marker light around the outside. Position it exactly how you want it to be mounted permanently.
   Once you are satisfied with the position, peel off the red backing to expose the adhesive.
3. Use the promoter packet to wipe the entire area where the Vinyl Oval Side Marker Covers will attach.
4. Carefully reposition the Vinyl Oval Side Marker Cover without letting it touch the marker light immediately. Once you are certain of the position, lightly press it onto the marker light. Make any final small adjustments, then press the cover firmly. Apply pressure all around the surface to ensure it adheres properly.
5. Repeat the same procedure on the other side. Clean the area with rubbing alcohol.