INSTALLATION INSTRUCTIONS

Included: 2 x Stainless Steel Oval Side Marker Covers, 1 x promoter packet

1. Wash your side marker lights on the fenders with rubbing alcohol. This removes all oil from the surface. Be sure to clean every nook and cranny so the trim plate can get a strong adhesive grip.
2. Take the Trim Oval Covers and place them against the side marker light. Center the cover on the marker light — you will see a small outline of the marker light around the cover. Position it exactly how you want it to be mounted.
   Note: You may slightly bend the stainless steel oval covers to match the slight curve of your marker lights.
3. Once you are satisfied with the fit, peel off the red backing to expose the adhesive. Use the promoter packet to wipe the entire area where the Trim Plates will attach.
4. Carefully reposition the Trim Oval Covers without letting them touch the marker light immediately. Once you are certain of the position, lightly press the covers onto the marker light. Make any final small adjustments, then press the covers firmly. Use your fingers to press all around the surface to ensure full adhesion.
5. Repeat the same procedure on the other side. Clean the area with rubbing alcohol.