|
PROWLER Keyless Remote
Programming your
KEYLESS REMOTE
INSTRUCTIONS
We can not
guarantee that you can program this yourself. However, your local
dealer will be able to program this for you. If you have any
problems you may contact us for help
admin@TheProwlerStore.com or 352 666 8379 M-F 9:00am to 2:00pm
EST
VERY IMPORTANT:
-
Read all of
these instructions before beginning. Practice the procedures
first before starting.
-
One
programmed remote transmitter must be available for the
following procedure to work.
-
Reprogram
all remote transmitters.
-
Any existing
remote transmitters not used during programming will become
inoperative.
Programming Instructions:
1.
Switch ignition on.
2.
Use the programmed remoter transmitter and press and hold remote
transmitter unlock button for up to 10 seconds.
3.
After holding the unlock button for 5 seconds, press remote
transmitter PANIC button and release both buttons at the same time.
4.
Ensure acoustic signal is emitted indicating programming mode is
active.
5.
Within 30 seconds carry out the following procedure for each remote
transmitter.
a. Press and release remote transmitter lock and unlock
buttons at the same time….
b. Then press any remote transmitter button.
6.
Ensure acoustic signal is emitted after each remote transmitter
operation.
7.
Switch ignition off or wait 30 seconds to exit programming mode.
8.
Ensure final acoustic signal is emitted.
NOTE: A Maximum of 4
remote transmitters can be programmed. |