Phone: 352 688 8160 M-F EST 

PROWLER Grille Logo©

PART#  ACC-822040 or  ACC-822041

INSTALLATION INSTRUCTIONS 

Parts included:     1 x Logo with self adhesive back,  1 x Adhesive Promoter Packet

1.  IMPORTANT:  Clean grille in the area you will mount the logo first with soap and water to remove any dirt then - with household Isopropyl Alcohol or rubbing alcohol.
You MUST remove even the slightest dirt and especially oil (even oil from your fingers) from the grille surface.  Let dry for 3 minutes.

2.  Take the logo and without removing the backing put it up to your grille and see where you want to mount it.  It is whatever looks best to you. 
You will want to hand bend the emblem so it rests along the bend of the grille without forcing it down.

3.  Take your grille logo and pull off the red backing on the backside.  This will expose the sticky tape back.  Try not to touch the stick back with your fingers or anything else. 

Once you are satisfied with the placement, remove the red liner from the attachment tape on the backside of the Logo.  When you are certain it is in the correct position - Press firmly to set.  Push firmly along the entire perimeter edge to ensure a tight bond.  It is best to let it set for 8 hours.  Do not get it wet during this time.

CARE AND MAINTENANCE:  Care must be taken when cleaning your cover. It is a good idea to lightly dust your cover with a clean soft cloth first in order to prevent any particles from scratching it. Then wipe (using a new clean soft cloth) with a good quality streak free glass cleaner.