|
Mounting
Individual Letter and Number Emblems
Mounting
Instructions
1.
First, wash the area on the car where you are to mount
the emblems with soap and water. Next, wipe down the
area with some rubbing alcohol. This will help remove
any oils that are on the paint surface. It will not
hurt your paint..
2. Now take your new emblem and without
peeling off the backing hold it up to the spot where it
is to be mounted. Become familiar with where it will
mount.
3.
Place masking tape in an "L" shape to guide you where to
mount your letters. See diagram 1 below.
4. Once you are satisfied, take your packet of
promoter included and wipe the area using the damp
towelette where the new emblem will mount (this will not
hurt your paint).
5. Peel the liner off the back of the new
emblems one at a time and carefully and slowly hold it
up to the spot where it is to be mounted. Gently set
the new emblem in place without pressing on it. Now
press firmly on the new emblem all over it's surface to
form a tight bond. Do this to each letter or number
that you have.
6. Carefully wipe the emblem and area around
each letter or number with rubbing alcohol to clean the
area of any residue. Remove the masking tape. You're
done!
Diagram 1 |
