688 8160 M-F
Chrysler Crossfire Stainless Steel
Rear Trunk Trim Plate
1 x Brushed Stainless Steel Trunk Trim Plate, 2 x chrome caps,
packet of promoter
Wash the area where you will be mounting your new grilles carefully to
remove any road grime and oils. If your car has been waxed within
the last six months it is best to clean the area with rubbing alcohol to
remove it. You will want to get a good bond when applying your new
Carefully hold the trunk trim strip up to the area where it is to be
mounted. Move it around until it is centered and the screw holes
line up properly.
Once you are comfortable with how
it will fit open your packet of "Promoter", this is designed to
prepare the surface for a strong bond. Wipe the moistened pad over
the area where the parts will attach to the car.
Now peel the back off the automotive 3M tape to expose the sticky side
of the mounting tape. Hold the trim strip just above where it is
to be mounted and line it up as before.
Once you are sure where you want it -firmly press the trim strip in
Press it on firmly, then press it down firmly all over the surface.
Apply a small glob of household caulk or silicone (not included) on the
screw heads and push the chrome caps on top.
Copyright 2005 - 2017
Hot Car Accessories